Best Wireless Router

I’m keen! But how?

Browsing interrupted
If that happens, the PL-E52P's power consumption drops to near zero, unlike traditional adapters that stay fully powered on at all times. Compared to the lengthy installs and hassles of other routers, this development from ASUS offers true ease of use, and puts fast networking speeds quickly within your reach. Please refer specification pages for full details. I just recently purchased a TP Link TD W router However, now that I have the router and am not experienced in setting these things up, I would be grateful for some help. Share your internet connection with your guests with no need to share your personal password or network resources.

The legal bit

ASUS RT-N66U – TomatoUSB firmware Flashing Guide

Any help is appreciated. After installing Tomato, Parental Controls work the way they are supposed to. Everything is disconnected mid-stream. Same thing with ddwrt, as I have used that in the past on an older router. If you are using a Merlin build, please test it and if it works, I will gladly consider switching.

The result was that the parental control works, meaning that the banned computer cannot access internet anymore. I wonder if you tried exactly the same on stock firmware, as it supposed to work too… So, even the parental control is not very granular configurable, it seems to work fine.

Try streaming both before the cut-off time, then see if they continue past the cut-off time. If they both stop, then Parental Controls are working. I wanted to try Tomato-Shibby for this very reason, which seems to have fixed the Parental Controls issue now as both streams stop at the cut-off time, but the wireless connectivity is occasionally intermittent on Tomato I am not sure if it is the TomatoUSB firmware issue but have you tried to baseline your wireless noise floor and choose a wireless channel that is less congested?

Hi shadowandy, no, I have not tried that but perhaps I should. Can you direct me on how to do that please? By the way, thanks for the awesome flashing instructions. To baseline or calibrate your wireless, we will need to measure the existing noise floor for the affected range — 2. To measure the noise floor, 1. Login to your TomatoUSB web admin using a wired computer 2.

To choose a wireless channel that is less congested, 1. Click on the Refresh button 3. If you are unable to locate an unused channel, choose a channel whereby most of the RSSI is in the range of to dBm. The more negative is that number, the weaker is the signal of others e. Thank you for these instructions but I am not sure what the objective is.

Is the goal to change to a specific channel on my router? Right now Tomato24 is on 6 and Tomato50 is on Auto. I got the floor as you suggested dBm. Not sure where to go from here. Also, someone on the Tomato Shibby General forum stated that the build that I chose might be unstable and suggested flashing an older build.

Is there any truth to that? If so, how would I go about flashing to an older build, and which build should I choose? Would I use the same process I used to flash from the Asus stock firmware to the build I have now? The objective is to measure the wireless interference in your area and hopefully get the software to work better by taking account of the surrounding noise.

Thank you very much for your help. As with dd-wrt, the process works smoothly when performed from an XP OS. That was before I installed the firmware. The firmware version on my router is Tomato Firmware 1. So Yes or No?

And if yes, then how? The simple guest account requires only the virtual wl0. For my guest wireless, I had created: My wireless clients could connect, get a DHCP address in the vlan on the separate subnet but there was no internet access.

I assumed that to be a routing or gateway configuration problem but I was not able to resolve the issue. You have a interesting set up. IP address of actual gateway Subnet mask: This routing rule is suppose to route all traffic on the new interface to the next hop your actual gateway. Try if it works. If it have internet access, I suspect your guest wireless might be able to reach out to your non-guest segment via your actual gateway. It might be a security concern.

I ask because the factory firmware has a tendency to randomly disconnect hard drives I verified many people were having this issue via Google search. It does hold an IP belonging to the same subnet as the gateway right? Just trying to figure out how it is routing. My intent is to make it a router for your guest lan while still remaining as an AP for your regular non-guest wireless. Not pretty sure if it is achievable.

For the harddisk, the disconnection could be due to some firmware spinning down the disk when there are no activities. I vaguely remember that TomatoUSB has got this feature. Do experiment with this feature to see if it solves your issue. Cannot really help on this issue as I am not using this feature. I have direct access as usual. That is other than we I tried your suggestion. I did play around with this in the past too but I stopped after I accidentally blocked myself out and had to reset the router, ha-ha!

Thank you for this page! I had very slight differences with the procedure described:. I did not receive a prompt about incompatible firmware. Keep holding the reset button until the power led starts to flash on and off. When power led starts flashing, release the reset button and proceed. When I powered on the router with the reset button held down, my power light never started flashing.

The Restoration utility seemed to immediately recognized it was time to go and did something. If I wanted to go back to stock, I have to go through the restoration method, correct? I cannot upgrade to stock direct from Tomato. Yes, you are right.

You will need to go through the restoration method as it is the safest. You settings will be lost so do make a note of any special settings you have e. I followed the instructions I found here, and everything proceeded as outlined except I was never advised that the firmware was incompatible.

I have tried it several times with the same result. I also tried to reload the stock firmware with the same result: I tried both via the asus utility and the web interface. To make matters even worse, I cannot connect to the internet any longer. Any idea where I can start to fix this? If I can still upload to the router through the utility, is there hope? Is there a way to log the full url of Web traffic on my network running Tomato on this device? I see a list of accessed domains but not the full url request.

I just could use the webservice on Also thanks to posters Glenn Sullivan and Mike Jones for their information. I was using tomato-K26USB Output power on wifi limited in europe for max mWatt.

And it is limited in new original firmware. Firewall features are no different. Flashing back to original firmware uses the firmware restoration application too, instead of pointing it to a tomatoUSB firmware, you use the original ASUS firmware. I really like what you guys tend to be up too. This kind of clever work and reporting! I did all these below. I did not see any warning about error firmware. Few minutes later I use the address on 4 and it work.

For win7 x64 i get it to work by running restoration util in Win XP compatibility and than selecting Run as Admin. Thanks for the tips. The windows compatibility mode does help for apps that do not run in bit environments. Video playback is now smooth and flawless. Any ideas why my connection speeds have been slaughtered?

Bricked my router with the 64k tomato flash and have not been able to fix it.. I started the latest version of merlin firmware.. Umm… Use the Asus recovery tool and you will be good. Caution need to be taken when flashing between 3rd party firmwares.

In your case, from asuswrt-merlin a 3rd party firmware to tomatousb another 3rd party firmware. This guide is more targetted at those flashing from stock firmware. When flashing from 3rd party firmware to another, it is important to clear the nvram.

You can do it via key presses and then use the recovery again to flash the 3rd party firmware. Otherwise, you can restore to stock firmware, completwly erase nvram, then install the new 3rd party firmware via recovery. Thanks for sharing your experience of flashing from asuswrt-merlin 3rd party firmware to tomatousb 3rd party firmware.

The set of instructions have been written sometime ago for flashing stock ASUS firmware to tomatousb 3rd party. Maybe you might want to recover to stock ASUS firmware, followed by fully clearing nvram and lastly recovery to tomatousb. Place the router into recovery mode. Open your web browser to Hi, is this instruction still correct?

But they appear to be the latest versions. I have the Dark Knight and am ready to flash. The flashing instructions are still valid. These are the newer firmware with all features like the old mega.

Nice finding you got there. Yes, the miniweb works fine. I could get one via a computer plugged directly so the let the cable modem off the hook. I ended up flashing the OEM firmware Yuck and that works, at least for the minimum of features.

I think I may need to roll back a a version or two. Anyone have any experience with this problem on this or any other version of the firmware? Will it inherit my settings or do I need to copy them manually or export them? I did it myself. Try to navigate the menu and use the firmware with a language of your choice.

Otherwise, you can try loading the firmware via recovery. It happen to me, this is what I did. First download an English version and save. Access your router gui and go to Administration. Your instinct will tell you which one it is and go to the very last section which say something like updater….

Browse for the English firmware that you download and upload it. To comply with regulatory amendments, we have modified our certification rule to ensure better firmware quality. This version is not compatible with all previously released ASUS firmware and uncertified third party firmware. Please check our official websites for the certified firmware.

Flashing your router with TomatoUSB 3. Some of the TomatoUSB features are: DHCP reservation in the original firmware do not work really well. For some reason, some clients just do not get their reserved IP correctly despite having the correct MAC address DHCP reservation in the original firmware does not give clues what you are reserving for.

This is subjective, to some, the QoS is just fine but the one in firmware 3. To be fair, this is fixed if you flash up to 3. Flashing your router with TomatoUSB. If these step-by-step guides have been very helpful to you and saved you a lot of time, please consider treating shadowandy to a cup of Starbucks. VLan id is limited to from GUI. CLI should be able to expand to more.

Maybe ASUS updated their firmware utility? Thanks for the article! Hope the article will be more useful for the next reader! Cheers, Morden No need for the Asus recovery software as you can just do the following. Thanks for the guide!! So I want following setup: I think its called adaptive qos or what.

Is this possible with Tomato on n66u? Hi, Thanks for the guide. Thanks Chris Scott, For future upgrade, just need to upgrade from the web admin. It appears to me that the current location for the firmware has changed again to here: Thank you very much for your guide!!

Only found N5x firmware. Fancy timing is not required, as you implied, it just has to be done in the proper order… 1. Updated the firmware download location. Need him to fix it. DaveW, Personally I have yet to try this out but on my other devices that support USB devices, attaching a hub does not break the functionality. I cleared the nvram before and after uploading the firmware with the firmware restoration tool. Any ideas on what might cause this to happen?

Thanks for the guide, very helpful! C, I am assuming you are from Singapore. Flashing went fine but after flashing I could not access the webGUI. No what I tried… Had almost given it upp when i found the solution: Anders, Thanks for sharing your experience. Will try out the wps button trick the next time round if I need to clear the nvram.

A few points in the guide are wrong 1. Then you can leisurely go to your pc and use the ASUS upload utility to load the firmware. It will now reboot 4. Maybe this is because I am under Windows 8 64bit? Should I wait for 10 mins and then manually power off the router and do a Nvram clean? What can I do to put the router into firmware restoration mode? MDunkleSr, The difference in the nonk and 64k is the amount of nvram set aside for saving the router settings.

All well after that. Hope that helps someone. Hopefully, that will get you to a point where the restore utility can see the router.

Thank you for your help. The other is to choose a channel with lesser interference. I am hoping these two steps will address your wireless drop issues. It would be nice if it was that simple. Bos, For my guest wireless, I had created: Bos, You have a interesting set up. LAN1 this should be your new VLAN This routing rule is suppose to route all traffic on the new interface to the next hop your actual gateway. Sorry, I wanted to bump my question and add a new one since 2 months have passed and no answer.

Thanks for keeping this thread alive. What are the routing entries on this AP? I had very slight differences with the procedure described: Ranger, Yes, you are right. Please help… I followed the instructions I found here, and everything proceeded as outlined except I was never advised that the firmware was incompatible.

This guide was all i needed. Navigate to the downloaded firmware file. Click Administration on the navigation panel. Select a task from the configuration options: To launch the Device Discovery utility: This utility uploads a firmware file to the wireless router. The process takes about three to four minutes. Launch rescue mode before using the Firmware Restoration utility. Troubleshooting I cannot access the router GUI for configuring the router.

To do this in Internet Explorer 8: Cannot find the router: The following are the factory default settings: Can I still register it? We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials. Please go to http: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of Use on the supplied antenna.

Operation is subject to the following two conditions: To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. In addition, mere aggregation of another work not based on the Program with the Program or with a work based on the Program on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.

Each version is given a distinguishing version number. Page of 54 Go. Table of Contents Add to my manuals Add. Page 2 Product warranty or service will not be extended if: Page 4 Table of contents Notices Page 8 Rear features Reset button This button resets or restores the system to its factory default settings. Creating Your Network Creating your network Positioning your router To get the best wireless network performance from your wireless router, follow the recommendations below: What You Need What you need To set up your network, you need one or two computers that meet the following system requirements: Before You Proceed Before you proceed Before configuring your wireless router, apply the steps described in this section to each computer on the network to avoid problems connecting to the wireless network.

The wireless router GUI provides access to various configuration settings. Setting Up The Wireless Security Settings To protect your wireless network from unauthorized access, you need to configure its security settings. Asus Ddns Service 2. Appendices We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials.

Page 37 This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Page 39 Operation is subject to the following two conditions: Page 40 peuvent a ecter son fonctionnement. Page 42 pieces of it in new free programs; and that you know you can do these things.

Page 44 a You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. Page 45 In addition, mere aggregation of another work not based on the Program with the Program or with a work based on the Program on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

Way of entering in router with 10.0.0.1 IP address

Leave a Reply